|
| STM Multiplexing Solutions |
Torque offers next generation STM-1 (optical and electrical), STM-4 and STM-16 SDH multiplexers to provide multiple services from E1 / T1 tributaries (software configurable as E1 or DS1), E3 / DS3 tributaries (software configurable as E3 or DS3), 10/100Base-T Ethernet, STM-1/4/16 and GigE interfaces.
The STM-1, VCL100MC-1 (upto 63 E1) is a compact, modular, and cost effective STM-1 SDH multiplexer equipment designed to manage bandwidth and provide E1 or fractional E1, voice and data access service over STM Networks. Also offered is STM-1/4/16 SDH ADM Multiplexer with the following interfaces:
- E1
- E3/DS3
- STM-1 (S1.1, L1.1, L1.2)
- STM-4 (S4.1, L4.1, L4.2)
- STM-1 (S16.1, L16.1, L16.2)
- 10/100Base-T Ethernet
- GigE (1000 Mbps) Transport card
- GigE (1000 Mbps) Switching card
|
|
| Next Generation STM-1 / STM-4 / STM-16 SDH Multiplexers |
STM-1 ADM Multiplexer |
STM-1 Add-Drop multiplexer (with upto 84 E1) E3, DS3, 10/100BaseT Ethernet interfaces. |
STM-4 SDH ADM Multiplexer |
STM-4 (upgradable to STM-16) Add-Drop Multiplexer with end-to-end provisioning for multiple service from E1s, E3, DS3s, STM-1e, STM-1o, 10/100Mbps Ethernet and GigE services. |
STM-16 SDH ADM Multiplexer |
STM-16 Add-Drop Multiplexer with 256E1, E3, DS3, STM-1e/1o, STM-4 and 10/100Mbps and GigE Ethernet interfaces at STM-16 rates. Full redundancy. Configurable to STM-1/STM-4. Upgragable to STM-16.
Tributary Interfaces
- 28 x E1
- 63 x E1
- 3 x E3/DS3
- 2 x STM-1 (S1.1, L1.1, L1.2)
- 8 x 10/100Base-T Ethernet
- 2 x GigE Transport card
- 8 x 10/100 Base-T and 2 x GigE switching card
|
SDH / STM-1 Optical to SDH / STM-1 Electrical converters |
Provides a simple and cost-effective conversion between STM-1 optical interface to STM-1 electrical interface. |
|
 |
© Copyright
Torque Technologies 2008